Modski66
Moderator
Helpful member, Share holder & resident Barrel Smith.
Go ahead, make my day - give me a pie!
Posts: 3,803
Likes: 4,710
|
Post by Modski66 on May 24, 2023 21:16:35 GMT
Now I have the PPK working well, I feel the need to modify it. 😁 First up is the barrel; I decided to try the tight barrel again, but this time at the normal length, and inside a new steel outer to replace the plastic effort. Recently I read that the 22lr version of the PPK is actually made from die-cast alloy, just like the replica! So I have decided to make mine a 22lr replica, making the muzzle the same by using an offcut of a 0.22 barrel to form the muzzle end so it shows some real rifling. To get some performance data, I took chronograph readings with steel bb's and Blasters with the original barrel, and shot a target with each, then repeated the exercise with the new barrel. What I got was different to my expectations, the new barrel showed a reduced fps with both ammo types, but the accuracy with steel bb's was VASTLY improved. However, the Blasters which were excellent to start with, showed a slight deterioration! 🤔 These are the pictures of the barrel and the targets. I only shot at 7 feet for convenience and to establish a group size. The new barrel will be blued eventually.
|
|
gunman1964
Trail Boss
Share Holder
Posts: 1,140
Likes: 2,310
|
Post by gunman1964 on May 24, 2023 21:44:32 GMT
i still havnt looked at mine yet lol i have 2 of these now i willget round to it soon as busy working at the moment . great work on the barrel
|
|
Modski66
Moderator
Helpful member, Share holder & resident Barrel Smith.
Go ahead, make my day - give me a pie!
Posts: 3,803
Likes: 4,710
|
Post by Modski66 on May 24, 2023 22:11:54 GMT
|
|
|
Post by HeadHunter on May 25, 2023 7:09:19 GMT
The new barrel seems to be well matched with the steel BBs buddy, shame about the blasters though. I would always take accuracy over power !
I like the .22LR replica idea too.
|
|
Modski66
Moderator
Helpful member, Share holder & resident Barrel Smith.
Go ahead, make my day - give me a pie!
Posts: 3,803
Likes: 4,710
|
Post by Modski66 on May 25, 2023 22:28:59 GMT
Barrel cold-blued and re-fitted. It looks a bit smudged-up because of the Renaissance Wax I used to 'seal' the surface and give a bit lubrication to the recoil spring. Shame about that mould line...
|
|