|
|
Post by oz on May 28, 2021 10:37:35 GMT
Hi Shaun, re barrel size to the above question is yes. Is it a easy job to fit a air soft valve stem in the DW715 ? Regards Paul.
|
|
CaptDAR
Moderator 
The RIF Marshall
Always count your shots and don’t miss
Posts: 4,831
Likes: 5,892
|
Post by CaptDAR on May 28, 2021 10:43:45 GMT
Yes I did mine as well.
|
|
CaptDAR
Moderator
The RIF Marshall
Always count your shots and don’t miss
Posts: 4,831
Likes: 5,892
|
Post by CaptDAR on May 28, 2021 10:56:52 GMT
With the help of @headhunter. Stripped the action and fitted the 6mm airsoft valve. Few little niggles as I’m far far away from being a gunsmith but with the pictures and instruction al went well.
Before the valve exchange my new DW715 was averaging 281 FPS with RWS MK 4.5 7g now after test and shooting a string it’s averaging 355 FPS a healthy increase of 74 FPS.
|
|
|
|
Post by oz on May 28, 2021 13:53:24 GMT
That's a big improvement Capt. My 715 figs of 322.8 340.8 33.2 fps with same pellet don't seem to be too bad. Not too keen on stripping the pistol, visions of tiny springs and screws popping out etc. Not sure, is it worth it ? Opinions please. Paul
|
|
CaptDAR
Moderator
The RIF Marshall
Always count your shots and don’t miss
Posts: 4,831
Likes: 5,892
|
Post by CaptDAR on May 28, 2021 13:57:03 GMT
Your FPS is well acceptable so I wouldn’t bother.
|
|
|
|
Post by HeadHunter on May 28, 2021 20:02:45 GMT
That's a big improvement Capt. My 715 figs of 322.8 340.8 33.2 fps with same pellet don't seem to be too bad. Not too keen on stripping the pistol, visions of tiny springs and screws popping out etc. Not sure, is it worth it ? Opinions please. Paul I am getting an average of 351 fps with my 4" DW715, which means it's probably (from memory) shooting from 375 fps max down to 325 fps min. It's not too difficult to do but if you're unsure about doing it I'd give it a miss buddy. Power isn't everything, fun is more important, if it's accurate enough then just leave it Paul. |
|
