|
|
Post by HeadHunter on Mar 19, 2021 13:19:52 GMT
Well you've all got very short memory then  or perhaps haven't made the link; probably a bit of both, but my username on AGF is 'rusteh'. CaptDAR - I 3D printed you some speedloader trays last year. HeadHunter - I bought some 715 springs from you last year, you fecked them up if you recall (jig was set up too short and you forgot to change it) as they were too short and you had to send some more  I felt sorry for you and printed you a couple of speedloader trays too. Been trying for ages to find the forum that I'd heard Shaun had set up, saw the ban on AGF and nobody dare say where your new forum was  ; glad I've found it now I'm not a prolific poster with a wealth of knowledge, just enjoy shooting my small collection of replica and non-replica pistols (and a replica rifle): - Umarex 92FS
- PP700S-A
- DW715
- Sig P226
- Rifle - Umarex Ruger 10/22
Hi Buddy, it's great to see you here on the forum. My apologies for not putting '2 & 2 together' with your forum name. Funny thing is I was wondering about you just the other day, trying to rack my brain to remember your name on AGF as there was few people that I never got around to giving a personal invite to this new forum before the mods kicked me off AGF (for inviting their members to this forum), lol. Glad to see you've found us buddy, I will just go and adjust your permissions so that you can freely post on the rest of the forum......brb |
|
|
|
Post by HeadHunter on Mar 19, 2021 13:22:56 GMT
Welcome to the forum Rusty, your permissions are all set now. Feel free to 'mosey' about and post where ever you want buddy  |
|
Rusty
The Sheriff of Dodge
Generous member & Share holder
Posts: 266
Likes: 314
|
Post by Rusty on Mar 19, 2021 13:27:35 GMT
Welcome to the forum Rusty, your permissions are all set now. Feel free to 'mosey' about and post where ever you want buddy Thanks pal, glad i found it |
|
|
|
Post by HeadHunter on Mar 19, 2021 13:45:20 GMT
Welcome Rusty. Could you post it on the for sale section with photos so I can have a look also? Thanks! Well, 2 things - I cannot see a for sale section, plus they not things I sell; I only 3D print things for like minded friends/acquaintances on forums as a gesture of good will, recovering only postage costs (if it's worth bothering) and occasionally a nominal sum for filament (if it's a large print). Looking back at my previous interaction with HeadHunter, these cost £4.55 to post, though 17hrs to print!  :  Unfortunately the sales section has a 50 post limit before any member can post anything for sale in there, any member can buy but there's a limit for posting. We do have a 'Freebie' section where you can offer goods to other members for a nominal charge (postage and a little material cost is acceptable), so that might be an idea. |
|
Rusty
The Sheriff of Dodge
Generous member & Share holder
Posts: 266
Likes: 314
|
Post by Rusty on Mar 19, 2021 13:51:25 GMT
Well, 2 things - I cannot see a for sale section, plus they not things I sell; I only 3D print things for like minded friends/acquaintances on forums as a gesture of good will, recovering only postage costs (if it's worth bothering) and occasionally a nominal sum for filament (if it's a large print). Looking back at my previous interaction with HeadHunter, these cost £4.55 to post, though 17hrs to print! : Unfortunately the sales section has a 50 post limit before any member can post anything for sale in there, any member can buy but there's a limit for posting. We do have a 'Freebie' section where you can offer goods to other members for a nominal charge (postage and a little material cost is acceptable), so that might be an idea. Unless it's breaking some kind of rule, for the time being I would prefer for it to remain 'informal' if that's possible? Don't want to set any expectations when I have a tremendously busy day job, the few DW715 speedloader trays and Umarex 8 shot speedloaders I've done for people, have all been on the basis of I'll post and people pay postage costs when they receive it, so it's not like i am out to scam people, but appreciate if there are rules. |
|
twodoctors
Moderator 
Our 'Bargain Hunting' Share Holder
Posts: 2,546
Likes: 3,012
|
Post by twodoctors on Mar 19, 2021 14:02:16 GMT
Welcome Rusty. Could you post it on the for sale section with photos so I can have a look also? Thanks! Well, 2 things - I cannot see a for sale section, plus they not things I sell; I only 3D print things for like minded friends/acquaintances on forums as a gesture of good will, recovering only postage costs (if it's worth bothering) and occasionally a nominal sum for filament (if it's a large print). Looking back at my previous interaction with HeadHunter, these cost £4.55 to post, though 17hrs to print, but they're perfect fit for the 715 speedloaders!  They are better than my wooden ones! And the holes will be more accurately placed also.  I know someone else selling something very similar but for 4 cylinders at £12 + P&P. You can probably save a bit of plastic by just having 6 "tubes" holding the shells, rather than 6 holes in a block, if you see what I mean. Very nice though! |
|
|
|
Post by HeadHunter on Mar 19, 2021 14:09:48 GMT
RustyI've no problem whatsoever with you keeping it on an informal basis buddy, But you can do that through the freebie section, as long as other members respect that you have other higher priorities outside of the forum. I personally think that it's great that you're prepared to freely offer your 3d printing services to other members for such a nominal fee and waiting for you to find time to do it is more than acceptable for me and I'm sure that it will be for other members too.
|
|
Rusty
The Sheriff of Dodge
Generous member & Share holder
Posts: 266
Likes: 314
|
Post by Rusty on Mar 19, 2021 14:26:32 GMT
Rusty I've no problem whatsoever with you keeping it on an informal basis buddy, But you can do that through the freebie section, as long as other members respect that you have other higher priorities outside of the forum. I personally think that it's great that you're prepared to freely offer your 3d printing services to other members for such a nominal fee and waiting for you to find time to do it is more than acceptable for me and I'm sure that it will be for other members too. I'll get something up in the freebies section then, when I've time to get my head round it |
|
|
|
Post by HeadHunter on Mar 19, 2021 14:28:27 GMT
Rusty I've no problem whatsoever with you keeping it on an informal basis buddy, But you can do that through the freebie section, as long as other members respect that you have other higher priorities outside of the forum. I personally think that it's great that you're prepared to freely offer your 3d printing services to other members for such a nominal fee and waiting for you to find time to do it is more than acceptable for me and I'm sure that it will be for other members too. I'll get something up in the freebies section then, when I've time to get my head round it No worries, no rush.......whenever you get a moment buddy |
|
Modski66
Moderator
Helpful member, Share holder & resident Barrel Smith.
Go ahead, make my day - give me a pie!
Posts: 4,246 
Likes: 5,448
|
Post by Modski66 on Mar 19, 2021 20:21:03 GMT
Well, 2 things - I cannot see a for sale section, plus they not things I sell; I only 3D print things for like minded friends/acquaintances on forums as a gesture of good will, recovering only postage costs (if it's worth bothering) and occasionally a nominal sum for filament (if it's a large print). Looking back at my previous interaction with HeadHunter, these cost £4.55 to post, though 17hrs to print, but they're perfect fit for the 715 speedloaders! They are better than my wooden ones! And the holes will be more accurately placed also. I know someone else selling something very similar but for 4 cylinders at £12 + P&P. You can probably save a bit of plastic by just having 6 "tubes" holding the shells, rather than 6 holes in a block, if you see what I mean. Very nice though! Don't run yourself down! that wooden one looks great, and the magnets are inspired... |
|
or perhaps haven't made the link; probably a bit of both, but my username on AGF is 'rusteh'.
I felt sorry for you and printed you a couple of speedloader trays too.
; glad I've found it now 
