Post by billybobmills on May 26, 2022 23:01:01 GMT
Not posted any new images in a while so here's some HK's
HK45
Think of the 4.5mm HK USP (made by KWC which most seem to love) add a better build and feel, bit more modern and this is the result. OEM VFC.
Its a hefty feeling replica and has a clever / complicated single action double action design in that when using double action it will not cycle the slide unless you have put a round in the chamber first. You can put one in the chamber and then use the decocker followed by double action and the slide will cycle.
This is up there in the collection. Only 'bad' bit is the trigger isnt the best, the reset is poor with no real feel.
I've been trying to add the VFC built USP or P8A1 (same as the USP but with a back to front decocker / safety) to the collection but with most things these days they are out of stock.
VP9
The VP9 (or SFP9 as its known outside the US) is not a bad replica. Its got a more modern design and more compact than the HK45 (I think its another VFC gun). It got a nice feel, decent ergonomics and shoots quite well. The trigger is better than the HK45's but its nowhere near as complicated. I'm not a fan of the finish on the slide on this one though. Nowhere near as nice as the HK45's finish.
It also seems to suffer pretty bad cool down and struggles to get through one mag of slow shooting on normal green gas (not in cold weather) (and this is the same with both copies I've had). It does seem to perform properly on red gas.
HK416 A5
Not sure how to describe this rifle. Its one stunning replica. OEM VFC again.
I was lucky enough to pick one of these up last year. Not seen them come back into stock anywhere since.
All metal (bar the grip and stock), fully take downable like the real thing, with removal bolt carrier, buffer + spring etc. Felt recoil gives quite a thump and can be adjusted for more FPS or more recoil via a small grub screw in the bolt.
The action cycles just as it should too with the bolt picking up a round and feeding it into the chamber.
I've got the 4.5mm DPMS but its just not in the same league. Yes this costs more (about 1.5x) but its more than worth it.
HK45
Think of the 4.5mm HK USP (made by KWC which most seem to love) add a better build and feel, bit more modern and this is the result. OEM VFC.
Its a hefty feeling replica and has a clever / complicated single action double action design in that when using double action it will not cycle the slide unless you have put a round in the chamber first. You can put one in the chamber and then use the decocker followed by double action and the slide will cycle.
This is up there in the collection. Only 'bad' bit is the trigger isnt the best, the reset is poor with no real feel.
I've been trying to add the VFC built USP or P8A1 (same as the USP but with a back to front decocker / safety) to the collection but with most things these days they are out of stock.
VP9
The VP9 (or SFP9 as its known outside the US) is not a bad replica. Its got a more modern design and more compact than the HK45 (I think its another VFC gun). It got a nice feel, decent ergonomics and shoots quite well. The trigger is better than the HK45's but its nowhere near as complicated. I'm not a fan of the finish on the slide on this one though. Nowhere near as nice as the HK45's finish.
It also seems to suffer pretty bad cool down and struggles to get through one mag of slow shooting on normal green gas (not in cold weather) (and this is the same with both copies I've had). It does seem to perform properly on red gas.
HK416 A5
Not sure how to describe this rifle. Its one stunning replica. OEM VFC again.
I was lucky enough to pick one of these up last year. Not seen them come back into stock anywhere since.
All metal (bar the grip and stock), fully take downable like the real thing, with removal bolt carrier, buffer + spring etc. Felt recoil gives quite a thump and can be adjusted for more FPS or more recoil via a small grub screw in the bolt.
The action cycles just as it should too with the bolt picking up a round and feeding it into the chamber.
I've got the 4.5mm DPMS but its just not in the same league. Yes this costs more (about 1.5x) but its more than worth it.